diamond sa ch-6616 losone via dei patrizi 5 tel. ++41-91/785 45 45 fax ++41-91/785 45 00 e-mail: diamond@diamond-fo.com diamond fiber optic components fsma ? 2.5 connector hms-10/ag sm hfs-10/ag mm specifications subject to change without notice 002-037-205p002028 applications: telecommunications, catv, lan, man, wan, test & measurement, industry, medical, sensors compatibility: with sma connectors with ? 2.5 mm ferrules design/materials: fiber alignment: sm: active core alignment via patented two-step crimping process mm: via patented crimping process polish: convex (pc) ferrule: ? 2.5 mm tungsten carbide with copper-nickel alloy insert, spring loaded (10 n), anti-rotation keyed, with air pressure relief guides mating adapter: tungsten carbide in inox housing external parts: inox, 1/4"-36 uns sma threading cable retention: coupled to ferrule on cable ods 3.5 mm, signal interruption at 10 n available as: - unterminated connector - terminated patch cable, patchcord or pigtail see ordering information on reverse termination tools and equipment: see section on tools and equipment specifications: single mode multimode units test conditions insertion loss (il) typ 0.2 max 0.5 typ 0.2 max 0.5 db iec 1300-3-4; = 1300/1550 nm return loss (rl)* 45 40 db iec 1300-3-6; = 1300/1550 nm repeatability il: max 0.1 db service life min 1000 matings operating temperature -40 +85 -40 +85 c storage temperature -40 +90 -40 +90 c strain relief (cable) 1 00 (signal interruption at 10) n * measured with high resolution reflectometer hp 8504a
order number codes 1 connector code 2 connector code for termination on other end of assembly - for pigtails: insert 000 - for patch assemblies: insert connector code for other connector 3 code for fiber or cable 4 length in meters see ordering information for additional details 38 rigid 1/4"36 uns-2b 55 max 12.3 ex 6 ex 8 2.5 38 rigid 1/4"36 uns-2b 55 max 12.3 ex 6 ex 8 2.5 1/4"36 uns-2b 1.2 2.5 7.2 23.5 9.5 3.8 ex 8 ex 5.5 6.5 + 0 .2 0 mounting perforation max wall tickness 7 mm 123 4 fsma 123 4 connector single mode type designation: hms-10/ag ferrule materials: tungsten carbide/copper-nickel alloy insert external parts: inox polish geometry: convex (pc) dimensions order number fiber/cable unterminated connector terminated assembly 9/125/900 2 4 2 - 0 0 0 - 0 0 1 l 0 0 0 2 4 2 - x x x - 0 0 1 l x x x 9/125/900/2100 2 4 2 - 0 0 0 - 0 0 2 l 0 0 0 2 4 2 - x x x - 0 0 2 l x x x 9/125/900/2500 2 4 2 - 0 0 0 - 0 0 3 l 0 0 0 2 4 2 - x x x - 0 0 3 l x x x 9/125/900/3000 2 4 2 - 0 0 0 - 0 0 4 l 0 0 0 2 4 2 - x x x - 0 0 4 l x x x 9/125/900/3500 2 4 2 - 0 0 0 - 0 0 5 l 0 0 0 2 4 2 - x x x - 0 0 5 l x x x connectors for other fiber and cable dimensions available upon request multimode type designation: hfs-10/ag ferrule materials: tungsten carbide/copper-nickel alloy insert external parts: inox polish geometry: convex (pc) dimensions order number fiber/cable unterminated connector terminated assembly 50/125/900 2 4 1 - 0 0 0 - 0 0 1 l 0 0 0 2 4 1 - x x x - 0 0 1 l x x x 50/125/900/2100 2 4 1 - 0 0 0 - 0 0 2 l 0 0 0 2 4 1 - x x x - 0 0 2 l x x x 50/125/900/2500 2 4 1 - 0 0 0 - 0 0 3 l 0 0 0 2 4 1 - x x x - 0 0 3 l x x x 50/125/900/3000 2 4 1 - 0 0 0 - 0 0 4 l 0 0 0 2 4 1 - x x x - 0 0 4 l x x x 50/125/900/3500 2 4 1 - 0 0 0 - 0 0 5 l 0 0 0 2 4 1 - x x x - 0 0 5 l x x x connectors for other fiber and cable dimensions available upon request mating adapter type designation: mmt-10.2/a material mating sleeve external parts zirconia inox 1 4 7 - 3 0 1 - 9 0 1 v 0 0 1 order number
|